TP Link Tech Support Number | TP Link Toll Free Number | +1-800-8901-603

Getting a Signal to Your Adapter
Your router setup is now's now time for the other half of the battle - getting the signal to show up on your 2nd PC, which is using the adapter card! REMEMBER: we're using Windows, not Linksys's software! Still getting some troublesome get connect us on TP Link Tech Support Number
1.       Finding the router signal on the wireless network list: Double click the "Network connections" icon on the lower right hand side of the screen, in the Windows tray. A screen showing all signals in the area one being sent out by your router .
If for any reason you can't find this "Network connections" window, it can be found in Start / Settings / Control Panel / Network.

If you see your router's signal, double click it. If you do not see your router's signal, something went wrong during your router setup - most likely, your router has "Wireless SSID Broadcast" set to "disable" within the "Wireless/Basic Wireless Settings" menu of the router setup page. Go back and check it!
2.       Connecting to the signal with WEP Key 1: Windows will now attempt to connect to the signal being broadcast by your router. If everything goes well, you'll get a dialog box asking for the "WEP Key" that we saw before, during the router setup.

This is the self-generated key that the router software translated after you put in that password and clicked "Generate," as seen in "Configuring the Router's Settings", Step 3, above.

Remember how it creates 4 WEP Keys, but you will only need to remember Key 1? This is where you will have to go back to your PC with the router on it, and click the "Wireless" tab, and the "Wireless Security" tab. Look for "Key 1" and write it down on a piece of paper. It's a ridiculously long string of 26 letters and numbers.
If you are unable getting 26 letter key get contact to TP Link Tech Support Number

Type out Key 1 -It will ask you to type it out twice, actually - the second time is just to confirm. Click OK, and your computer *should* connect to your router, and your problem is solved!
If the adapter is not getting connect to the signal, try typing in the WEP Key 1 again, making sure your caps lock is on, and that you've typed it in correctly. It's easy to mis-type it, because it's such a long thing to type in.
If you are not getting connect with TP Link Tech Support Number


Post a Comment

Popular posts from this blog

Router Technical Support

Troubleshooting routers With Expert's Help | +1-800-891-5603

Cisco customer service number | cisco internal gtrc phone number | +1-800-891-5603