Linksys Technical Support | Linksys router technical help | +1-800-891-5603

Linksys Technical Support 



When you have a problem that you cannot resolve, the resource of last resort is your Linksys Systems technical support representative. To analyze a problem, your technical support representative will need certain information about the situation and the symptoms that you are experiencing. Speed up problem   isolation and resolution process, collect the necessary data before you contact your representative.
This appendix describes Linkys technical support  about your inter network and how to present that information to your technical support representative. Refer to appropriate chapter within this book for specific information that you need to collect for each technology. In addition, some sections describe Linksys Connection Online, Linksys's primary, real-time support channel on the World Wide Web (WWW), and Linksys Connection Documentation, Linksys's library of product information on CD-ROM. Both are valuable  resources in troubleshooting network problems.  Linksys technical support  for documentation regarding your problem before you contact your technical representative.


Gathering Information About Your Internetwork
Before gathering any specific data, compile a list of all relevant symptoms that users have reported on the network (such as connections dropping or slow host response).
The next step is to gather specific information. Typical  Information needed to troubleshoot internetworking problems falls into two general categories: information required for any situation, and information specific to the topology, technology, protocol, or problem.
Information that is always required by technical support engineers includes the following:
•Complete specifications of all routers involved
•Description of changes, if any, made to the network prior to the problem/symptom
•Description of the nature of the problem (whether the problem occurs intermittently, what errors are being observed, and so on)
•Version numbers of software (obtained with the show version command) and firmware (obtained with the show controllers command) on all relevant routers
•Network topology map
•List of hosts and servers (host and server type, number and function of each host/server on the network, description of host operating systems implemented)
•List of network layer protocols, versions, and vendors
To assist you in gathering this required data, the show tech-support exec command has been added in Linksys IOS Release 11.1(4) and later. This command provides general information about the router that you can provide to your technical support representative when you are reporting a problem.
The show tech Support command outputs the equivalent of the show version, show running-config, show controllers, show stacks, show interfaces, show buffers, show process memory, and show process cpu exec commands. In many cases, the show tech Support command outputs can be long and can affect router performance.



http://www.routersupporthelpdesk.com/Linksys-Router-Support.php

or

Comments

  1. I'm finding the solution of this problem then i saw this blog and I got my solution thanks blogger for helping me out

    ReplyDelete

Post a Comment

Popular posts from this blog

Troubleshooting routers With Expert's Help | +1-800-891-5603

Router Technical Support

cisco customer service number | contact cisco | +1-800-891-5603